Flash File Amigoo Dream 3

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo Dream 3 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo Dream 3 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo Dream 3 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo Dream 3 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo Dream 3
  • Amigoo Dream 3 Factory Reset
  • Where can I get Amigoo Dream 3 stock firmware File
  • how to flash Amigoo Dream 3
  • SP flash tool error
  • Amigoo Dream 3 flashing
  • How to replace Amigoo Dream 3 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo Dream 3 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo Dream 3
  • How to Download Firmware for Amigoo Dream 3 phone
  • Update Software Latest for Amigoo Dream 3
  • Download Amigoo Dream 3 USB Driver- All USB Drivers

Flash File Amigoo H3000

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo H3000 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo H3000 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo H3000 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo H3000 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo H3000
  • Amigoo H3000 Factory Reset
  • Where can I get Amigoo H3000 stock firmware File
  • how to flash Amigoo H3000
  • SP flash tool error
  • Amigoo H3000 flashing
  • How to replace Amigoo H3000 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo H3000 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo H3000
  • How to Download Firmware for Amigoo H3000 phone
  • Update Software Latest for Amigoo H3000
  • Download Amigoo H3000 USB Driver- All USB Drivers

Flash File Amigoo V10

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo V10 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo V10 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo V10 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo V10 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo V10
  • Amigoo V10 Factory Reset
  • Where can I get Amigoo V10 stock firmware File
  • how to flash Amigoo V10
  • SP flash tool error
  • Amigoo V10 flashing
  • How to replace Amigoo V10 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo V10 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo V10
  • How to Download Firmware for Amigoo V10 phone
  • Update Software Latest for Amigoo V10
  • Download Amigoo V10 USB Driver- All USB Drivers

Flash File Amigoo R300

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo R300 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo R300 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo R300 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo R300 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo R300
  • Amigoo R300 Factory Reset
  • Where can I get Amigoo R300 stock firmware File
  • how to flash Amigoo R300
  • SP flash tool error
  • Amigoo R300 flashing
  • How to replace Amigoo R300 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo R300 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo R300
  • How to Download Firmware for Amigoo R300 phone
  • Update Software Latest for Amigoo R300
  • Download Amigoo R300 USB Driver- All USB Drivers

Flash File Amigoo R200

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo R200 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo R200 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo R200 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo R200 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo R200
  • Amigoo R200 Factory Reset
  • Where can I get Amigoo R200 stock firmware File
  • how to flash Amigoo R200
  • SP flash tool error
  • Amigoo R200 flashing
  • How to replace Amigoo R200 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo R200 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo R200
  • How to Download Firmware for Amigoo R200 phone
  • Update Software Latest for Amigoo R200
  • Download Amigoo R200 USB Driver- All USB Drivers

Flash File Amigoo M1 Max

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo M1 Max Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo M1 Max Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo M1 Max Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo M1 Max Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo M1 Max
  • Amigoo M1 Max Factory Reset
  • Where can I get Amigoo M1 Max stock firmware File
  • how to flash Amigoo M1 Max
  • SP flash tool error
  • Amigoo M1 Max flashing
  • How to replace Amigoo M1 Max firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo M1 Max Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo M1 Max
  • How to Download Firmware for Amigoo M1 Max phone
  • Update Software Latest for Amigoo M1 Max
  • Download Amigoo M1 Max USB Driver- All USB Drivers

Flash File Amigoo Dream 2

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo Dream 2 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo Dream 2 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo Dream 2 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo Dream 2 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo Dream 2
  • Amigoo Dream 2 Factory Reset
  • Where can I get Amigoo Dream 2 stock firmware File
  • how to flash Amigoo Dream 2
  • SP flash tool error
  • Amigoo Dream 2 flashing
  • How to replace Amigoo Dream 2 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo Dream 2 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo Dream 2
  • How to Download Firmware for Amigoo Dream 2 phone
  • Update Software Latest for Amigoo Dream 2
  • Download Amigoo Dream 2 USB Driver- All USB Drivers

Flash File Amigoo R900

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo R900 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo R900 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo R900 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo R900 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo R900
  • Amigoo R900 Factory Reset
  • Where can I get Amigoo R900 stock firmware File
  • how to flash Amigoo R900
  • SP flash tool error
  • Amigoo R900 flashing
  • How to replace Amigoo R900 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo R900 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo R900
  • How to Download Firmware for Amigoo R900 phone
  • Update Software Latest for Amigoo R900
  • Download Amigoo R900 USB Driver- All USB Drivers

Flash File Amigoo A5000

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo A5000 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo A5000 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo A5000 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo A5000 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo A5000
  • Amigoo A5000 Factory Reset
  • Where can I get Amigoo A5000 stock firmware File
  • how to flash Amigoo A5000
  • SP flash tool error
  • Amigoo A5000 flashing
  • How to replace Amigoo A5000 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo A5000 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo A5000
  • How to Download Firmware for Amigoo A5000 phone
  • Update Software Latest for Amigoo A5000
  • Download Amigoo A5000 USB Driver- All USB Drivers

Flash File Amigoo R9 Max

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo R9 Max Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo R9 Max Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo R9 Max Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo R9 Max Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo R9 Max
  • Amigoo R9 Max Factory Reset
  • Where can I get Amigoo R9 Max stock firmware File
  • how to flash Amigoo R9 Max
  • SP flash tool error
  • Amigoo R9 Max flashing
  • How to replace Amigoo R9 Max firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo R9 Max Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo R9 Max
  • How to Download Firmware for Amigoo R9 Max phone
  • Update Software Latest for Amigoo R9 Max
  • Download Amigoo R9 Max USB Driver- All USB Drivers

Flash File Amigoo R700

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo R700 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo R700 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo R700 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo R700 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo R700
  • Amigoo R700 Factory Reset
  • Where can I get Amigoo R700 stock firmware File
  • how to flash Amigoo R700
  • SP flash tool error
  • Amigoo R700 flashing
  • How to replace Amigoo R700 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo R700 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo R700
  • How to Download Firmware for Amigoo R700 phone
  • Update Software Latest for Amigoo R700
  • Download Amigoo R700 USB Driver- All USB Drivers

Flash File Amigoo X10

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo X10 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo X10 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo X10 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo X10 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo X10
  • Amigoo X10 Factory Reset
  • Where can I get Amigoo X10 stock firmware File
  • how to flash Amigoo X10
  • SP flash tool error
  • Amigoo X10 flashing
  • How to replace Amigoo X10 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo X10 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo X10
  • How to Download Firmware for Amigoo X10 phone
  • Update Software Latest for Amigoo X10
  • Download Amigoo X10 USB Driver- All USB Drivers

Flash File Amigoo X18

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo X18 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo X18 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo X18 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo X18 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo X18
  • Amigoo X18 Factory Reset
  • Where can I get Amigoo X18 stock firmware File
  • how to flash Amigoo X18
  • SP flash tool error
  • Amigoo X18 flashing
  • How to replace Amigoo X18 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo X18 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo X18
  • How to Download Firmware for Amigoo X18 phone
  • Update Software Latest for Amigoo X18
  • Download Amigoo X18 USB Driver- All USB Drivers

Flash File Amigoo R8

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo R8 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo R8 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo R8 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo R8 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo R8
  • Amigoo R8 Factory Reset
  • Where can I get Amigoo R8 stock firmware File
  • how to flash Amigoo R8
  • SP flash tool error
  • Amigoo R8 flashing
  • How to replace Amigoo R8 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo R8 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo R8
  • How to Download Firmware for Amigoo R8 phone
  • Update Software Latest for Amigoo R8
  • Download Amigoo R8 USB Driver- All USB Drivers

Flash File Amigoo X15

Android Firmware or Android Flash File ROM is the operating system that must be installed on a smartphone so that the smartphone is switched on and running all the features and applications. Android has become the best operating system software because of its compatibility and user-friendly nature.

Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile. If you do not like the firmware installed by the device manufacturer on your Android device, you are free to replace it with your own custom firmware.

Android flash files are files that are added to the system or completely replace the system. You can make changes not only to flash files/system partitions but also to other partitions such as boot partition or user data.

Flashing Delete all your mobile data like

  • Settings
  • Google account
  • System and app data
  • Downloaded apps
  • Music
  • Pictures
  • All other user data

What is the Stock ROM?

The android device comes equipped with a “stock ROM,” also known as the “stock firmware”. The stock ROM is the pre-installed operating system in your device. The stock ROM has limited functionalities that are defined by the phone’s manufacturer. If you want to add additional features to your device, you may need to resort to a custom ROM.

What is Android Flashing?

Android flashing means removing the stock firmware from the Android device and replacing it with the same version or any other version. You can flash your device with a recovery mode or flash tool.

You may upgrade or downgrade the Android firmware with flashing. Flashing will fix software issues, IMEI related issues, and improve device performance.

Before Flashing

Charge the phone at least 50% without interrupting the flashing process with a low battery. Interrupting the firmware installation means bricking your phone.

Amigoo Flashing with Recovery Mode

Android phones with Android 8 and above cannot flash with a lower version.

Step – 1

  • First, turn off your Amigoo X15 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
Locate Downloaded Firmware file from Storage
  • In this step, Download the Firmware Update file and move to Drive storage {Do not put the file in the folder}.
  • After that, Locate Downloaded Firmware Update file from Storage.
  • Now tap on the Firmware Update file and install it.
  • Finally, your device should boot to the new version.

Step – 2

  • Download the firmware file and move to SD Card storage.
  • Turn off your Amigoo X15 Android Mobile by holding down the power button.
  • After that, Hold the
    • Volume Up + Power Button
    • Volume Down + Power Button
  • Release all buttons, when the Logo is displayed.
  • Then you will see the Android exclamation mark. (Sometimes it takes you directly to the Recovery screen).
  • Then while holding down the Power button press and release Volume Up Button.
Hard Reset Wipe data - ResetFree.com
  • Use the volume buttons select the Wipe data/factory reset option and press the Power button to activate the option.
  • Now a screen with NO and  YES option will appear, with the volume buttons go to the YES option and press with the power button.
  • Once the reset is complete, you will be bounced back to the same recovery mode menu.
  • Then select Apply update from SD card option.
  • Now locate the downloaded firmware file from Storage.
  • After that, Tap on the firmware file and install it.
  • Your device will begin updating automatically.
  • After complete, again with the volume buttons select the Reboot system now option and press the power button to confirm.
  • Finally, your device should boot to the new version.

If the above methods did not work, Follow this guide Hard Reset to wipe all data.

Exit Recovery mode

  • After you enter the Recovery Mode menu.
  • Use the volume buttons to select the Reboot system now option and press the power button to confirm.
  • After that, Your device will be rebooted automatically.
  • Now you have successfully exited Recovery mode

Flashing with Flash Tool

You can flash Amigoo X15 Android Phone Firmware with Flash tool. Here you can find detailed information about firmware flashing with Flash tool.

  • First download the flash file, flash tool, and USB drivers on your PC.
  • Now install the USB drivers for your Android phone.
  • Then launch the Flash tool on your PC.
  • In this step, switch off your Phone.
  • Then press and hold
    • Volume Up and Power Button
    • Volume Down and Power Button
  • Next, Connect your mobile to the PC with a USB cable.
  • Now browse the flash file in the flash tool and click on the download button.
  • Now flashing starts on your phone.
  • Flashing takes 10 to 20 minutes. Please wait until the flashing completed.
  • After flashing completed, Your device automatically rebooted.
  • Finally, Flashing done on your mobile and remove the phone from the PC.

Download Flash Tools

Download Android USB Drivers

Here you can Download and install Amigoo X15 Android Phone device USB (Universal Serial Bus) drivers for free.

Download USB Drivers

Android Phone HARD RESET
Android Phone UNLOCK
Android Phone FLASH FILE

Search Keywords :

  • Flash File Amigoo X15
  • Amigoo X15 Factory Reset
  • Where can I get Amigoo X15 stock firmware File
  • how to flash Amigoo X15
  • SP flash tool error
  • Amigoo X15 flashing
  • How to replace Amigoo X15 firmware
  • Download the Amigoo phone Stock Firmware
  • Amigoo X15 Stock Firmware ROM (Flash File)
  • How to Flash Stock Firmware on Amigoo X15
  • How to Download Firmware for Amigoo X15 phone
  • Update Software Latest for Amigoo X15
  • Download Amigoo X15 USB Driver- All USB Drivers