Electricity Bill Calculator
Type in the units from your meter and the slab rates printed on your bill. You get the estimated amount, a slab-by-slab breakdown and what your next unit will cost.
Slab-by-slab breakdown
An estimate only. Your DISCOM's bill is final. Your slabs are saved in this browser so you don't have to type them again.
Two homes on the same street can use 250 units each and get bills that differ by hundreds of rupees, because one is on a different tariff category, one pays duty on the fixed charge, or one is billed every two months. The calculator above works with whatever your DISCOM charges. It only needs the numbers that are already on your bill.
Where to find your slab rates
Look at the back of a paper bill or the "tariff details" section of the PDF bill. Most DISCOMs print the energy charge for each slab, the fixed charge and the duty rate there. If yours doesn't, the State Electricity Regulatory Commission publishes the full tariff order every time it revises rates, and DISCOM websites usually have a one-page summary for domestic (LT residential) consumers. Use the order that is in force today, and the category printed on your bill: domestic, domestic with a higher sanctioned load, or a special category such as BPL.
Some tariffs list the fixed charge per kW of sanctioned load rather than per connection. Switch the fixed charge to "per kW" and enter your load. The sanctioned load is printed near your consumer number.
A worked bill: 246 units on the example tariff
Units = 14,628 − 14,382 = 246. On the example slabs (₹3 up to 100 units, ₹4.50 for 101–200, ₹6 for 201–300, ₹7.50 above 300):
First 100 units × ₹3 = ₹300. Next 100 units × ₹4.50 = ₹450. Last 46 units × ₹6 = ₹276. Energy charges = ₹1,026.
Duty at 5% of ₹1,026 = ₹51.30. Add the ₹75 fixed charge and the bill comes to ₹1,152.30, or about ₹4.68 a unit on average.
Switch the tool to "Meter readings" and you will see the same numbers. The average of ₹4.68 hides the fact that the last 46 units cost ₹6.30 each once duty is added. That gap between the average and the marginal rate is the most useful thing on the whole bill, and the line under the result tells you what your next unit costs.
Each slab at its own rate, or all units at one rate
Most domestic tariffs in India are telescopic: the first block of units is billed at the lowest rate whatever your total, and only the units inside each higher block pay the higher rate. A few tariffs, or some categories within a tariff, work differently. Once you cross a limit, every unit on the bill moves to the higher rate. The difference at the edge is large:
| Units in the month | Each slab at its own rate | All units at one rate |
|---|---|---|
| 250 | ₹1,177.50 | ₹1,650.00 |
| 300 | ₹1,492.50 | ₹1,965.00 |
| 301 | ₹1,500.38 | ₹2,445.38 |
Example slabs, ₹75 fixed charge, 5% duty on energy charges.
Under the one-rate method, the 301st unit adds ₹480. Under telescopic billing it adds less than ₹8. If your tariff order says something like "for consumption above X units, the rate applies to all units", choose "All units at one rate", and keep an eye on the limit in peak summer months.
Monthly bills, two-month bills and uneven months
Where billing is every two months, the slab limits are doubled, so 500 units over two months costs the same as 250 units in each month. The trouble comes with monthly billing in a household whose use swings. Using the example tariff, 350 units in May and 150 in June come to ₹2,512.50 across the two bills. The same 500 units split evenly would have cost ₹2,355. The heavy month spills into the expensive slab and the light month cannot claw it back.
That is one reason the AC season costs more than the extra units alone suggest. The AC cost calculator estimates how many units the AC itself adds.
Free units and subsidies
Several states give domestic consumers some free or subsidised units each month, and the rules differ. In some schemes the free units are simply deducted from every bill. In others, if you use even one unit more than the limit, you lose the benefit and pay for everything. Some schemes also waive the fixed charge, some don't. Enter the free units and tick the box if your scheme works the all-or-nothing way. Anything that comes off as a rupee amount, such as a flat state subsidy, goes in "Other subsidy".
The calculator prices free units at the lowest slabs, because they are the first units you use. With 100 free units on the example tariff, a 250-unit bill falls from ₹1,177.50 to ₹862.50.
What this estimate leaves out
Arrears from the last bill, late payment surcharge, meter rent, and any credit for interest on your security deposit all appear on real bills. So do rebates for paying online or before the due date, and rounding to the nearest rupee. Time-of-day rates for smart meters are not modelled either; if you are on one, ask your DISCOM how your peak and off-peak units were split.
To see which appliances are behind the units in the first place, list them in the appliance electricity cost calculator. The guide to reducing your bill works through the savings appliance by appliance.
Frequently asked questions
Why doesn't the calculator have my state's tariff built in?
Tariffs differ by state, by DISCOM and by consumer category, and the regulator revises them, usually once a year. A preset that is a year out of date would give you a confident wrong answer. Copying the slabs from your own bill takes a minute and is always current for you.
My bill has a 'minimum charge'. How do I enter it?
Some tariffs charge a minimum amount if your energy charges fall below it. The calculator does not apply minimums automatically. If your estimate comes out below the minimum on your bill, the minimum is what you will pay.
The result is a little different from my actual bill. Why?
Usually because of an item the calculator does not include: arrears, late payment surcharge, meter rent, interest credited on your security deposit, a rebate for paying online, or rounding. The guide to reading your bill explains each line so you can match them up.
Is electricity duty charged on the fixed charge too?
It depends on the state. Some levy duty only on energy charges, some on the energy and fixed charges together, and a few charge a flat amount per unit. Your bill normally shows the duty line separately, so you can check which base gives the same number.