The Jio Bharat V2 is a 4G keypad feature phone, not a smartphone, so the process to reset Jio Bharat V2 handset is very different from wiping an Android device. There is no Android recovery menu, no Volume + Power “wipe data” screen, and no app-based factory reset tool. Instead, a factory reset on this phone is done entirely through the on-screen Settings menu using the directional pad and the central OK key. This guide walks through the correct, menu-based way to restore the phone to its out-of-the-box state, explains the standard feature-phone reset codes you may have seen mentioned elsewhere, and covers what to do if you are locked out. Because a reset erases everything, back up your contacts and any photos first.
Before you reset Jio Bharat V2
A factory reset permanently deletes contacts saved to the phone memory, call logs, text messages, downloaded files, and any saved settings. Anything stored on the SIM (such as SIM contacts) or on a microSD card is usually left untouched, but it is safest to copy important data off the phone first. You can write contacts down, export them to the SIM, or note them elsewhere. The Jio Bharat V2 does not sync to a Google account the way an Android phone does, so there is no automatic cloud backup to fall back on. If you ever work with smartphones too, the same caution applies there, and our guide on how to back up and restore Android devices covers that workflow in detail.
One reassurance for feature-phone owners: because this is a non-Android device, it does not use Google’s Factory Reset Protection (FRP). After you reset Jio Bharat V2, you will not be asked to re-enter a previously synced Google account to get past the setup screen. FRP and similar anti-theft locks only apply to Android phones, where signing back in with the last-used Google account is mandatory after a wipe. Keep this distinction in mind if you also reset Android handsets.
Reset from the menu (recommended)
This is the official and safest method. With the phone powered on and unlocked:
- Press the central OK key (or the menu key) to open the main menu.
- Scroll to Settings and open it.
- Look for Device, Phone settings, or a General/System section.
- Open Restore factory settings (sometimes shown as Reset or Restore default settings).
- If prompted, enter the phone’s security or lock code. On many JioOS/KaiOS-based feature phones the default code is 0000 or 1234 if you never changed it.
- Confirm the action and let the phone reboot. The first boot after a reset takes a little longer than usual.
The exact wording of menu items can vary slightly between software versions, but the path is always inside Settings under a device or general system grouping. If you do not see “Restore factory settings” immediately, scroll fully through the Settings list, since the option often sits near the bottom. For a broader look at this approach across brands, see how to factory reset any keypad mobile.
Master reset codes
Many older and current feature phones support a typed “master reset” code entered from the dial/home screen instead of digging through menus. The two most widely documented standard codes are:
- *#*#7780#*#* – a factory data reset that clears app data and settings on many devices.
- *2767*3855# – a full master reset/reformat that wipes the phone more aggressively.
Caution: these codes can wipe the phone instantly, with no “are you sure?” confirmation and no undo. They are generic feature-phone codes, not codes confirmed specifically for the Jio Bharat V2, so they may do nothing on your unit or may behave differently than expected. The menu method above is the reliable, recommended route. Only use a dial code if the menu is inaccessible and you fully understand it will erase everything. For more on code-based resets on non-smartphones, see our guide to reset and unlock non-Android phones.
Locked out?
Unlike Android smartphones, keypad phones like the Jio Bharat V2 do not have a hardware button-combination that force-wipes the device from a powered-off state. There is no Volume-Up + Power recovery wipe to fall back on. If you have forgotten the security code and cannot get into Settings, try the common defaults (0000 or 1234) first. If those fail, do not keep guessing repeatedly, as some firmware locks further after several wrong attempts. Your safest next step is to contact JioCare support or visit an authorised Jio service centre with your proof of purchase, as they can advise on an authorised unlock or reset. Avoid unofficial “flashing” tools and unverified firmware files from random websites, as these can permanently brick the phone.
Frequently asked questions
Will a factory reset remove my SIM contacts and microSD files?
No. A factory reset clears the phone’s internal memory and settings, but contacts saved to the SIM and files stored on a microSD card normally remain intact. Even so, remove or back up the card before resetting if it holds anything irreplaceable.
Does the Jio Bharat V2 have Google FRP lock after a reset?
No. Factory Reset Protection is an Android feature tied to a Google account. The Jio Bharat V2 runs a JioOS/KaiOS-based feature-phone system, so after a reset you will not be asked to re-enter a Google account to finish setup.
What is the default security code to reset Jio Bharat V2?
If you never changed it, the lock or security code is commonly 0000 or 1234. If neither works and you are locked out, contact JioCare or an authorised Jio service centre rather than relying on unofficial tools.
